Brewguide Mode Setting [Brewguide Mode]
By default, the Brewguide Mode is set to On.
• On: The Brewguide Mode is enabled.
• Off: The Brewguide Mode is disabled.
Countdown Mode Setting [Countdown Mode]
By default, the Countdown Mode is set to Off.
• On: The Countdown Mode is enabled.
• Off: The Countdown Mode is disabled.
Hello Message Setting [Hello Message]
By default, the Hello Message is set to Off.
• On: The Hello Message will show when the scale is turned on.
• Off: The Hello Message will not show when the scale is turned on.
Weight Stable Indicator Setting [Weight Stable Indicator]
By default, the Weight Stable Indicator is set to Off.
• On: Weight Stable Indicator enabled. The Weight Stable Indicator on the bottom right of the
display lights up when the weight is stable.
• Off: Weight Stable Indicator is disabled.
Bluetooth Setting
[Bluetooth Setting]
By default, Bluetooth is set to On.
• On: Bluetooth is enabled, allowing the scale to connect to Acaia apps.
• Off: Bluetooth is disabled. The scale does not allow any Bluetooth connection.
Sleep Timer Setting [Sleep Timer]
By default, the Sleep Timer is set to 5 minutes.
The scale will automatically power off after 5 minutes if not in use.
Battery Saving
Setting
[Battery Saving]
By default, the Battery Saving is set to 90 seconds.
The LED display will dim to save power after the selected number of seconds when not in use.
Weighing Filter Setting [Filter]
By default, the Filter is set to Normal.
The weighing filter setting determines the speed with which the load receptor responds to and
determines the weight. [ High ] indicates a more stable but slower weighing result; [ Sensitive ]
indicates higher sensitivity and a faster weighing result.
Zero Tracking Setting [Zero Tracking]
By default, the Zero Tracking is set to 1D.
Zero Tracking is a function to help compensate the weight readout fluctuations at zero point
to improve the usability of the scale. Acaia Pearl Model S is allowed to compensate the
fluctuation by up to 2D according to industrial weighing guidelines.
• Off: It is not recommended to turn off zero tracking as the zero indication can drift easily with
changing room temperatures.
• 0.5D~3D: For example, since each division is 0.1 g, 3D = 0.3 g. When zero tracking is set to
be 3D, any initial weight b/- 0.3 g on the weighing pan will be zeroed out.
• 1D is recommended for Acaia Pearl Model S.
17
