MOTION
If MOTION mode is set, the channel would start recording
while object movement is detected.
ALARM
If ALARM mode is set, the channel would start recording
while sensor in is triggered.
EVENT
If EVENT mode is set, the channel would start recording
while object movement is detected or sensor in is triggered.
SCHEDULE
If SCHEDULE mode is set, the channel would start
recording according to the weekly recording schedule setup
in schedule menu.
DISABLE
If DISABLE mode is set, the channel would not do any
recording.
NOTE: While live viewing, the mode icon would be shown on each channel to
indicate which mode was set.
5) POST RECORD:
5s, 10s, 15s, 20s, 25s, 30s, 1m, 3m and 5m
In the record setup menu, using direction (UP/ DOWN/ LEFT/ RIGHT) buttons move to
the cell of POST RECORD and CH which is to be setup. Post recording time after event
being triggered for specific CH can be changed after pressing ENTER button. Use UP
or DOWN and ENTER to select the parameter.
NOTE: ALL option is used for all-channel setup
6)
LIVE AUDIO:
Set to turn on a specific channel or turn off all channels (turn-off by default).
Turning on Audio is possible using a remote control. The setting is carried out as
follows: On the Live screen, press the “Func” key + numerical key (1~4) + “Enter” key
on the remote control to turn on/off one of the channels 1-4. A horn icon will appear on
the screen.
NOTE: Only one change of output sound at a time.
21
Summary of Contents for ADR-7604H
