4.4 MOTION
To access
motion setup
, press ENTER button after moving highlight icon to MOTION
ICON in MENU. Motion setup menu will appear on monitor.
1) MOTION CH:
To select the CH in which motion detection sensitivity and area would be set.
2) SENSITIVITY:
Level 0 ~ 16
Move Highlight icon to Date Display Format in the Motion setup menu by using
UP
or
DOWN button. Motion detection sensitivity can be changed after pressing ENTER button.
Use UP or DOWN and ENTER to select the parameter.
3) DETECTION AREA
Move Highlight icon to Detection Area in the Motion setup menu by using
UP
or DOWN
button. Detection area setup menu will appear after pressing ENTER button.
After setup is finished, press SAVE & ESC button or ESC button to return to the previous
Menu with or without saving the setup.
22
Press ENTER to change
The setup mode(+ or -),
And then use direction
Buttons to add or cancel
The detection area.
NOTE:+ is for add;
- is for cancel
