Section2 System Appearance & Installation
2.1 Front Panel
1. Channel Selection buttons
Number buttons can be used to display given channel on monitor and input password.
2. Function buttons
a) FUNC
This button is reserved for future use.
b) LOCK
In order for only authorized person to operate buttons in front panel, this LOCK
button can be utilized. If this button is pressed, all of buttons in front panel are not
operated at the same time LOCK LED ON. To release button locking, password will
be requested after pressing LOCK button. If correct password is input, button locking
will be released.
c) PTZ (Pan, Tilt and Zooming)
The camera(s) with panning, tilting and zooming function would be connected with
one and some of video inputs of DVR. In order to control PTZ function of the
camera, PTZ button should be pressed first. And then direction buttons for panning
and tilting can be pressed.
d) SEARCH
This button can be used to enter playback sub-menu for searching out proper
recorded file for playback.
e) Sequential Display button
If this button is pressed, display channels would start to rotate sequentially according
to the cycle time set up in display setting menu.
NOTE: Sequential display icon would be shown on the left-up side of the monitor
after sequential display is turned on.
f) Display Mode Selection
Display mode selection button is pressed for switching display modes, single picture,
Quad-split, 8-split, 9-split, 16split would be switched.
g) ESC
This button is pressed to return upper menu.
h) MENU
7
