AEC-6712TU
30
* Install examples
A. install OS/2 from CD-ROM and use FAT file system.
System : SiS 586 PCI chip set with 16 MB memory
SCSI : ACARD ATP-6712TU
fdd : 1.44 MB TEAC
Hdd : Seagate ST11200N
file system :
FAT
Install Procedure as follows :
1. Make your system ready.
2. Edit OS/2 diskette(copied) config.sys
3. Insert OS/2 install diskette.
4. Insert OS/2 diskette 1(edited with ACARD SCSI-3 driver).
5. Load driver OK and Partition Hard disk.
6. Reinsert OS/2 install diskette and Boot from floppy again.
7. Insert OS/2 diskette 1 and load driver.
8. Follows OS/2 display Select OS/2 some config(FAT or
HPFS) and Format Hard disk.
9. Boot from Hard disk.
10. Install all OS/2 file system complete.
11. Boot OS/2 from hard disk again.
