AEC-6712TU
32
Start the installation by Fresh installtion,You need use
“link”
as follows:
1) Insert SCO UNIX boot disk(N1 or P1) and power on
2) When system boot from N1 or P1 type “link” and press <Enter> key
as follows :
SCO UNIX System V/386 on 80486
Boot : link <Enter>
3) SCO UNIX will ask you package name. You need type “aec671x”
and <Enter> as follows : What packages do you need linked in the
system, or q to quit?:aec671x <Enter>
4) Then follow the SCO UNIX installation procedure until installed
complete.
If ACARD PCI SCSI is not a boot device. You can start the installation
by typing “custom” under UNIX shell as follows :
%custom
You need relink the UNIX kernel and reboot your system for the new
kernel.
