www.acasis.com
The first time a new hard disk is used,it must be initialized
and formatted,then the computer can recognize it.
After setting up RAID mode, it must be initialized and
formatted,then the computer can recognize it.
When using the disassembled hard disk, there may be
a path conflict, and you need to reassign the access path
to identify it.
Resetting RAID mode will cause the data to be cleared.
XP system can only recognize 2TB hard disk maximumly.
Notice
Compatibility
This product is compatible with 3.5-inch SATA hard drives
and solid-state hard drives with standard SATA interface. If
a 2.5-inch hard drive is used, an additional adapter rack is
required.
Before removing the device, please stop using it and remove
it safely to avoid data or device damage.
Do not expose this product to excessively high temperature
or direct sunlight, keep it dry, handle with care.
The company is not responsible for any damage to the hard
disk or data loss caused by improper use or disassembly of
this product. Please refer to this manual and use the product
correctly.
5