3
Safety Precautions
Output voltage is up 72VDC. To avoid the risk of electrical shock,
use proper safety techniques when operating this device. Avoid
touching any part of the non-insulated output connection during
operation.
Avoid the risk of electrical shock, do not open the device.
Caution: The TS200 heatsink may be hot. Avoid touching the
heatsink.
This device is indented for qualified trained personnel who must use proper electrical
safety precautions
Read and follow all installation and operating information before using this device.
Use only AC power cable provided with this device.
Proper grounding of the device is required. Use only properly-grounded power
receptacle.
Inspect the device before operating. If it is appears damaged or defective, do not use it.
Preset the output voltage before making connections to output terminals.
Do not open the device. Do not operate device without the cover.
Do not operate or store the device outdoor.
Thermal Considerations
The TS200 is designed for indoor operation and within the environmental
temperature range of 0C to +40C. While operating, the device generates heat.
The TS200 must be placed on a location with enough space all around it. There
must be sufficient space around the heatsink in the rear to allow cooling.
Warning:
The heatsink may be hot. Avoid touching the heatsink.
III
