Accele HD Mobile DVR-720P USER MANUAL
[20]
5.
Device Installation
5.1 Power Cable Connection
DVR uses DC power supply, Working Voltage: 8V - 36V.
★
Switched Recorder Wire Connections
Power +
Red cable: Positive; Constant 12v.
Black cable: Negative; Chassis Ground
Yellow cable: Positive; Ignition switch or other switched source.
★
Timed Recorder Wire Connections (Bench test usually done this way)
Power +
Fuse
Power -
P
ower IN (RED)
Power IN Negative (Black)
A
CC IN (Yellow)
RED & YELLOW: Connect Together with 12v (+)
BLACK: Connect to Ground (-)
Attention
1.
The recorder is powered via DC power supply; please pay attention to the positive and negative polarity.
2.
The voltage is 8V~36V. Do not apply voltage beyond this range. With low voltage conditions,
the recorder will not power up. Under high voltage conditions, you will cause harm to the
recorder.
3.
Please make sure the recorder is connected directly to car power. Do not connect to the alternator,
the instantaneous voltage will harm to the recorder.
4.
The power cables must be able to withstand beyond 60W.
(For example, when vehicle output voltage is
12V, the power cables must be capable of withstanding at least 5A.)
5.
Please install a 15A fuse in line with the 12v wire to avoid short circuits and possible equipment
damage.
6.
Please cover cables with heat shrink tubing or wire loom to help prevent short circuit and accidental
disconnects.
Power in
(RED)
Power -
Power in (Black)
ACC in (Yellow
)
