CNC Controller Specialist
9 |
P a g e
3.
Breakpt Rstr (Breakpoint Restore)
This functionality used to saved line number & axis position when power goes off.
MeteorCNC will store the data in following conditions
-
During power failure in between running the program.
-
User stop the design with stop button from hand handle or By pressing
Emergency Stop.
Shortcut keys to go to this SHIFT + ENTER.
4.
Job Setup
User will send Z-axis to safe position by pressing Z=0 or XY=0. In
XY=0, Z-axis will move first & go to its defined Z safe height.
By turning ON the function, Machine will go to defined
Parked position after design finished.
User will defined X-axis parked position after design
finished.
User will defined X-axis parked position after design
finished.
User will defined X-axis parked position after design
finished.
This will shift X axis work offset & its unit is in mm.
This will shift Y axis work offset & its unit is in mm.
This will shift Z axis work offset & its unit is in mm.
Z Safe Height
Park Position
Park On/Off
X Position
Y Position
Z Position
Shift Offset
X Work Shift
Y Work Shift
Z Work Shift
