AC~240V
50Hz
• 80W per channel RMS into each channel at a 4 ohm load
• Audiophile quality sound with less than 2% THD @ 80W
• Bluetooth 5 wireless connectivity
• RCA mono subwoofer output
• Brushed aluminum housing lends a clean, modern look
• Short circuit protection circuitry
11
12
10
11
12
1. Power
2. USB
3. Input Select
4. Pause / Play
5. Previous Track
6. Next Track
Active Subwoofer
Left Speaker
Right Speaker
7. Display and IR Receiver
8. Left Channel VU Meter
9. Right Channel VU Meter
10. Bass Volume Control Knob
11. Treble Volume Control Knob
12. Volume Control Knob
1. Bluetooth Antenna Connection
(Screw Antenna in before use)
2. Optical Input
3. Subwoofer Output
4. Coaxial Input
5. CD Input
6. DVD Input
7. HiFi Line Output
8. HiFi Input
9. Right Speaker Terminal
10. Left Speaker Terminal
11. Smart Fan
12. AC Input: 240V/50hz
Front Panel
Back Panel
System Connection instructions:
Features
+
-
Mute
Volume Up
Volume Up
Previous Track
Next Track
Play/Pause
Play/Pause
Next Track
Volume Down
Volume Down
Previous Track
Stop
Input Signal Select
Input Signal Select
Repeat
Remote Control
1. Do not plug-in power supply until all parts
of the system are connected.
2. In order not to damage the circuitry, do not let the
positive and negative speaker wires touch each other
and cause a short circuit.
3. The audio input cable has a certain impact on the
music’s play, it is recommended to use a cable with
good shielding.
4. The plugs must be inserted firmly, poor contact
will produce noise or no signal output.
Thank you
for purchasing the Accento
Dynamica ADHA160BT Hybrid Stereo
Tube Amplifier. The tube preamp stage
imparts a warm, natural sound quality
while the solid state power amp offers
superb audio fidelity and efficiency.
Multiple input options including USB
media playback are available, and
Bluetooth 5 provides refined wireless
streaming from your mobile devices.
ADHA160BT
AC~240V
50Hz
MADE IN CHINA
