ACCES I/O Products, Inc.
MADE IN THE USA
mPCIe-AIO16-16F Family Manual
2
Rev 01
C
HAPTER
1:
Q
UICK START
It is recommended that you install the software package before
installing the PCI Express Mini Card (mPCIe) in your computer. You
can install the software
1
using either a stand-alone installer
downloaded from the website or an optional Software Master CD.
Run the installer you downloaded (or autorun.exe on the Software
Master CD) and follow the prompts to install the software for your
device.
Please note: during the installation you may be prompted regarding
the installation of non-WHQL-certified drivers; please carefully
confirm the digitally signed source of the drivers and accept the
installation.
Once the software has been installed, shut down your system and
carefully install the mPCIe card.
Re-start your system. Once the computer finishes booting, your
new digital I/O should already be installed and ready for use; you
can confirm this by launching Device Manager and looking under
the “Data Acquisition” section. If, for any reason, the device
displays a warning triangle, right-
click and select “Update Driver”.
1
In Linux or OSX please refer to the instructions in those directories.
C
HAPTER
2:
I
NTRODUCTION
PCI Express Mini Card (mPCIe), a low-profile small-footprint bus
standard originally intended for adding peripherals to notebook
computers, has become the de-facto standard for high-
performance, small form-factor devices in many applications.
•
PCI Express Mini Card (mPCIe) type F1, with latching I/O
connector
•
16-bit, Bipolar, Differential, A/D converters
•
Software selectable as 16+0, 8+4, or 0+8 (Single-Ended +
Differential Inputs)
•
7 channel-by-channel programmable differential input ranges
from ±0.64V up to ±24.576V
•
Sustained sampling rates up to 1MHz (2Msps)
•
A/D starts via software or periodic hardware timer
•
Ease of use
—
16-bit, 2MSPS complete data acquisition system
•
High impedance, 8-
channel input: 1 MΩ
•
Four 16-bit analog outputs
•
5 per-channel programmable ranges: 0V to 5V, 0V to 10V,
±2.5V, ±5V, ±10V
•
Outputs Drive ±10mA Guaranteed
•
RoHS compliant standard
C
HAPTER
3:
H
ARDWARE
This manual applies to the following models:
VENDEV
mPCIe-AIO16-16F mPCIe, A/D 16-bit, 2MHZ, 4 D/A 494F:C0E8
mPCIe-AIO16-16A mPCIe, A/D 16-bit, 500KHZ, 4 D/A 494F:C0E9
mPCIe-AIO16-16E mPCIe, A/D 16-bit, 250KHz, 4 D/A
494F:C0EA
mPCIe-AI16-16F
mPCIe, A/D 16-bit, 2MHZ
494F:80E8
mPCIe-AI16-16A
mPCIe, A/D 16-bit, 500KHZ
494F:80E9
mPCIe-AI16-16E
mPCIe, A/D 16-bit, 250KHz
494F:80EA
mPCIe-AIO12-16A mPCIe, A/D 12-bit, 500KHZ, 4 D/A 494F:C058
mPCIe-AIO12-16
mPCIe, A/D 12-bit, 250KHz, 4 D/A
494F:C059
mPCIe-AIO12-16E mPCIe, A/D 12-bit, 100KHz, 4 D/A
494F:C05A
mPCIe-AI12-16A
mPCIe, A/D 12-bit, 500KHZ
494F:C058
mPCIe-AI12-16
mPCIe, A/D 12-bit, 250KHz
494F:C059
mPCIe-AI12-16E
mPCIe, A/D 12-bit, 100KHz
494F:C05A
These models are full-
length “F1”
mPCIe devices (30 × 50.95 mm).
All units are RoHS compliant.
INCLUDED IN YOUR PACKAGE
mPCIe-AIO card
Available accessories include:
CAB-mPCIe-AIO
9 inch panel-mount DB37M twisted pair
cable assembly
ADAP37F-MINI
Direct plug-on terminal board mates
with DB37M on CAB-mPCIe-AIO
LF-BRK-P9259-37
Mounting bracket for DB37M on CAB-
mPCIe-AIO
mPCIe-HDW-KIT2
Mounting hardware for 2mm
mPCIe-HDW-KIT2.5
Mounting hardware for 2.5mm
Contact the factory for information regarding additional accessories,
options, and specials that may be available to best fit your specific
application requirements, such as Industrial Temperature (-40°C to
85°C).
C
HAPTER
4:
C
ONFIGURATION
S
ETTINGS
