ACCES I/O Products, Inc.
MADE IN THE USA
USB3C-104-HUB Manual
2
Rev B4d
C
HAPTER
1:
Q
UICK START
No software is provided with this board. There is no need to install
any drivers for the USB3C-104-HUB product.
Using the USB Hub Class Driver (that is built into Windows OS or
Linux etc) it will enumerate as three things:
•
Generic Hub
•
Super Speed Hub
•
Dock Management Controller
C
HAPTER
2:
I
NTRODUCTION
•
5-port USB 3.1 Gen 2 hub with data transfers up to 10 Gbps
•
One upstream USB C with 100 W Power Delivery 3.0 (PD)
•
One downstream USB C with 100 W Power Delivery 3.0 (PD)
•
Two USB Type C and two Type A downstream ports with Battery
Charging v1.2 and Apple Charging standards
•
ESD protection (+/-15kV IEC 61000-4-2 Level 4) on all data lines
•
Rugged, industrial grade (-
40˚C to 85˚C)
operation
•
Locking connectors prevent accidental disconnects
•
Sup (10Gbps), SuperSpeed (5Gbps), Hi-Speed
(480Mbps), Full
-Speed (12Mbps), and Low-Speed (1.5Mbps)
transfers supported on all ports
•
Compact, steel, low-profile enclosure
•
RoHS compliant
C
HAPTER
3:
H
ARDWARE
The USB3C-104-HUB is an industrial-grade 5-port USB hub
optimized for harsh and rugged environments. This hub has
latching / locking connectors on upstream and downstream ports as
well as a threaded locking power connection, preventing accidental
disconnects - making it ideal for high vibration applications. The
rugged steel enclosure, positive retention connections, and -
40˚C to
+85˚C operation makes the USB3C
-104-HUB stand out compared to
commercially available hubs, and it’s Made in the USA.
Each connection has been designed for rugged use without loose or
intermittent cables disrupting your application. The input power is
secured via screw terminals or a threaded DC Jack. Type C
connections utilize USB single screw locking standard cables
retained by the enclosure. The latching Type A ports’ connectors
themselves provide high-retention (50N) downstream connections
compatible with all industry-standard USB cables.
While USB has evolved, this card has enabled the maximum
functionality of USB by providing flexibility of power options using
USB PD 2.0 and USB 3.1 data transfer expansion in a single module
design.
This product is fully protected from faulty peripherals. Each port
(Non PD) utilizes a power distribution switch providing overcurrent
and short circuit protection. If a fault occurs, the power distribution
switch will disable that port and a warning will show in the operating
system. The disabled port can be re-enabled by clearing the fault
and cycling power to the port. PD ports utilize their own power
management circuitry for peripheral protection.
The boards are designed as PC/104 sized, with PC/104 mounting
holes, in a steel powder-coated enclosure with non-skid feet.
All units ship extended temperature and RoHS compliant.
INCLUDED IN YOUR PACKAGE
1× USB3C-104-HUB board
1× 3' USB 3.1 cable type C locking to type C locking (5A rating)
Available accessories include:
PWR-ACDC-24V10A-L
External Power Supply with locking
connector
LF
-JDC-PLUG
Locking DC Power Plug w/sturdy back shell
and solder tabs
CAB-USBACL
6’ USB 3.1 type A to C cable w/single
screw lock
CAB-USB3CCLL
3’ PD 5A USBC locking to USBC locking
cable
MP104-DIN
DIN rail mounting provision
Contact the factory for information regarding additional accessories,
options, and specials that may be available to best fit your specific
application requirements, such as conformal coating.
To take advantage of the Power Delivery (PD) feature on both the upstream port
to the host, and on the downstream PD port simultaneously, you’ll need to order a
CAB-USB3CCLL cable as a separate line item, as only one such cable is included
with the USB3C-104-HUB full version.
