ACCES I/O Products, Inc.
MADE IN THE USA
USB3C-104-HUB Manual
3
Rev B4d
C
HAPTER
4:
C
ONFIGURATION
S
ETTINGS
All configuration of this device is performed through software; any jumpers or switches are for factory use only.
The latest information can always be found on the product page on the website.
Useful Links
C
HAPTER
5:
S
PECIFICATIONS
PC Interface
USB
USB 3.1 Gen 2
Sup (SS+/10Gbps), SuperSpeed (SS/5Gbps), Hi-
Speed (HS/480Mbps), Full
-speed
(FS/12Mbps), and Low
-Speed (LS/1.5Mbps)
Environmental
Temperature
Operating
-40°C to
+85°C
Storage
-40°C to +
85
°C
Humidity
5% to 95% RH, non-condensing
ESD Protection
+/-15kV IEC 61000-4-2 contact
+/-15kV IEC 61000-4-2 air
Dimensions
Board
PC/104 format and mounting holes
3.550 in by 3.775 in
w/Enclosure
3.985 in x 3.990 in x 1.045 in
Weight
Board
80 grams
w/Enclosure 302 grams
Power
Power required
External power from 20 to 26VDC is required. Screw
terminals are rated for wire sizes of 14-26 AWG, and are
rated for 15A.
Wattage of the power supply affects power delivery output. At 50W, PD is 3A
maximum, with 100W, PD is the full 5A specification.
Connectors
USB Type A
Latching
Retention up to 50 Newtons (retained by latch)
Physical shock: Per EIA-364-27 Condition H (11ms 30G)
Vibration: Per EIA-364-
28D
Condition V, Test A
USB Type C
8 Newtons min, 20 Newtons max (insertion and
retention) without enclosure (-OEM version)
(retained by single screw lock in enclosure)
DC Jack (locking)
(MIL-STD-202G)
Vibration: Method 201A
Insertion Resistance: Method 302 Condition B
Thermal Shock: Method 107G
Model Options
-E
Non-locking version
-OEM
No enclosure (board only)
USB 3.1 vs USB 3.0
USB 3.0 was renamed to “USB 3.1 Gen 1” and operates at up to 5Gbps.
USB 3.1 Gen 2 supports 10Gbps
