Page
5
of
17
Copyright © Access-IS 2020
2. Installation
Mount the VAL100 on a 1.25 inch or 1.4 inch diameter pole.
The validator requires a 12
–24 V feed from the vehicle's ignition. Operational voltage range 10.5 to
33 V.
Warning: Ensure that the vehicle ignition is switched off during installation and when you connect
the VAL100.
2.1
Unpack the VAL100
Unpack the VAL100 and ensure that you have the following items:
Table 1: VAL100 parts list
Quantity
Description
1
VAL100
1
Mounting bracket with security lock
2
Pole clamps
1
Connector bracket
1
Pole cover
2
Security lock keys
1
14-way connector*
4
Crimps 24-18 AWG
20
Crimps 28-22 AWG
1
Ferrite
4
M3 x 6 Torx countersunk screws
6
M4 x 10 screws with captive washer
1
Adhesive drilling template
* Only provided for non-4G models.
Additional items for the 4G version of the product only:
Table 2: Items specific to the 4G version of the VAL100
Quantity
Description
1
USB dongle cable*
2
M3X8 P/HD captive washer
2
M4 x 8 screws with captive washer
3
M4 nylon insert nut
1
USB dongle bracket with thermal transfer pad
1
USB dongle clamp with foam pad
* Comprises a USB adapter cable pre-wired into a 14-way connector block.
Report any missing items or damage immediately to your Sales Representative.
