2
4
2
CERTIFICATION:
CETL WET
NO.
20347
3
MOUNT CROSSBAR
If there is an existing fixture remove it.
Mount the crossbar with bracket to the J-box
with the supplied screws. Make sure that the additional
ADD THE GASKET
Fit the supplied Gasket onto behind the Back plate.
MAKE WIRE CONNECTIONS
Gently pull the supply wires through the hole in the
crossbar . Gently feed the fixture wire through one
of the slits in the back plate and then through the hole
floating canopy. Connect the black supply
wire to the black fixture wire. Secure with the supplied
wire nuts. Connect the white supply wires to the white
fixture wire. Secure with the supplied wire nuts. Either
wrap the green wire around one of the protruding screws
or connect it to the supply ground wire. Secure all wire
with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
.
