cable adjusters counterclockwise until both front wheels do not spin
freely.
3.
Turn both cable adjusters in 1/4 turn increments (clockwise) until
wheels spin with a very slight amount of drag.
4.
Lower ATV, push ATV forward, and compress brake lever.
5.
If front wheels lock, adjustment is correct.
6.
If front wheels do not lock, additional adjustment is necessary
Checking/Adjusting Rear Wheel Brake System
The rear wheel brake system should be checked for proper operation
before every time the ATV is ridden. To check the system, use the
following procedure:
NOTE: The rear wheels should spin freely with the brake lever
released.
Disc Brake
Check the disc fluid level before every
ride.
1.
The disc fluid level should be at the
top level of window. If the fluid
level is at the bottom of window,
fill brake fluid to the top level.
Manufacturer suggests to use
DOT-4 brake fluid. Be careful not to
pour in exterior agent to the brake system.
2.
Change the brake fluid at every 500 hours ride.
3.
Before every ride, check the disc if any crack, excess consumption or
DISC
PADS
MIN
