background image

Read and follow all UL and Safety Standards before installing.  Refer to the manual and qualified personnel 

for assistance.  DO NOT install this device unless all entrapment and pinch points are eliminated. 

Revision A 

FEB100-NT 

Free Exit Box - No Touch Sensor 

Product Manual 

• 

Installation Instructions

 

• 

Wiring Instructions

 

Summary of Contents for FEB100-NT

Page 1: ...lling Refer to the manual and qualified personnel for assistance DO NOT install this device unless all entrapment and pinch points are eliminated Revision A FEB100 NT Free Exit Box No Touch Sensor Product Manual Installation Instructions Wiring Instructions ...

Page 2: ...gooseneck post 2 If the mounting holes are not used fill the holes with a plug or sealant to prevent water from entering the box Wall Mounting 1 Mount the system to a wall or flat surface Use appropriate mounting screws or anchors to securely attach the system 2 Never mount the system to a moving gate gate panel or next to a gate that causes vibration to the mounting point Continuous vibration fro...

Page 3: ...justment dial counter clockwise to decrease the time delay 3 Turning the adjustment dial fully clockwise to the end will put the sensor into a toggle mode TOGGLE MODE SETTING The time delay can be turned off and set to a toggle mode To set the Sensor in toggle mode 1 Turn the Time Delay Adjustment dial clockwise to the end SENSOR DETECTING DISTANCE ADJUSTMENT The IR Sensor detecting distance can b...

Page 4: ...can cause serious injury or death Read and follow all installation manuals reference manuals and warning label instructions 2 Vehicular gates are for vehicles only Pedestrians must use a separate entrance Keep all pedestrian traffic away from any vehicular gate No one should cross the path of a moving gate 3 Never allow children to operate or play with gate controls or to play in the area of a gat...

Reviews: