Access 3260 Series, Installation & Operational Instructions

6

INSTALLATION 

CONTINUED

Purge Cycle:

There are two different purges: The first at 30 
minutes after the tub is used and the second every 
24 hours at the time determined by when power is 
turned on at the breaker box.

1. 

Pump On/Off:

1st Press - the pump starts

2nd Press - the pump stops

2. 

Blower On/Off:

1st Press - the blower starts

2nd Press - the blower stops

3. 

Air Jet Speed (INCREASE)

4. 

Air Jet Speed (DECREASE)

5. 

Light Button:

1st Press - turn on light

2nd Press & Hold - turn off light

Cycling Colors - When turned on, Chromalight 
will be in Cycle Mode where the colors will slowly 
cylce from one to the next. To manually select your 
desired color, press the button again and again 
until the desired color is reached. It will stay on this 
color until turned off.

ACCESS TOUCH PLUS 

START UP AND OPERATIONAL INSTRUCTIONS

6

Increase Pressure

Decrease Pressure

6. 

Water Jet Pressure Control 

Turn control knob to increase or 
decrease the speed and pressure for 
the water jets. The water jets pressure 
control is divided between 2 air 
pressure controls on either side of the 
tub.

7. 

Aromatherapy Cap 

Unscrew cap and insert your favorite 
fragrance beads to bathe in a 
soothing aroma scent.