Learning mode
For a separate sound bar or device, the remote will not be able to learn how
to control it over HDMI and will need to be “learnt” separately by the remote.
The Maxi ATV remote control can learn a key function from another ‘source’
remote control.
1.
Choose your ‘target key’ on the remote control. It must be one of the following
keys: TV/AUX POWER / TV INPUT / VOL+/ VOL- / MUTE. This key will learn a
function from the source remote control.
2.
Press
4
and
6
for at least three seconds. The TV/AUX POWER key will flash
twice and remain on.
3.
Press your target key within 30 seconds:
• if valid, the TV/AUX POWER key will give a confirmation flash and remain on.
• if invalid, or you do not press within 30 seconds, the TV/AUX POWER key will
give a long flash and return to user mode.
4.
Hold the Maxi ATV remote control 3 - 6 cm from the source remote control with
the IR windows facing each other, then press your target key on the source
remote control (e.g. if your target key on the Maxi ATV remote control is mute,
press mute on the source remote control).
5.
If the IR signal is received correctly, the TV/AUX POWER key will turn off and
the remote control will return to normal mode (note: this can overwrite a
previously learned code).
6.
If the IR signal is not received correctly, or is received after 30 seconds, the
Maxi ATV remote control will not store the code from the source remote control:
it will give a long flash and return to user mode.
7.
If the
Back
key is pressed on the remote control while it is waiting for an IR
signal, the TV/AUX POWER key will give a long flash and return to user mode.
(If the target key is pressed, any learned code on it is cleared.)
8.
To clear the target key, press
4
and
6
for at least three seconds. The TV/AUX
POWER key will flash twice and remain on. Then press your
<target key>
twice.
The TV/AUX POWER key will flash to confirm the target key is cleared.
8
