7
VITAL Installation and User Guide
CHECK CONNECTIVITY
HOW TO ENTER SSID AND PASSWORDS
(only for Wi-Fi units)
FINAL VERIFICATION
Step 1:
Ensure the device is in range with a gateway.
Step 2:
While in Menu, navigate to “Connectivity”.
Step 3:
Press “OK”.
Step 4:
Wait a few seconds. If connectivity is successful, it
should say “Connectivity OK”.
Step 1:
Using the arrow keys navigate to the “Network” option.
Step 2:
Press “OK”.
Step 3:
Enter the SSID number and p
ress “OK”.
Step 4:
Enter the password and p
ress “OK”.
Step 5:
Next, using the arrow keys navigate to the “Security”
option.
Step 6:
Select “WPA-2 Personal” and press “OK”.
Step 1:
Log in to the unit with the keypad.
Step 2:
While in Menu, navigate to “Connectivity”.
Step 3:
Press “OK”.
Step 4:
Wait a few seconds. If connectivity is successful, it
should say “Connectivity OK”.
Step 5:
Make sure to check for the network bars, if the bars
appear on the top of the screen then the device is
communicating to AssetPro 360.
