background image

1

Safety notice:

1) The roller shutter door motors should be installed horizontally with precision.

2) The roller axle of the shutter door should be homocentric and horizontal. 

3) The motor must be satisfactorily earthed to prevent potential injury from shocks .The earthing connection bolts should 

be fixed to the chain wheel support board or electric appliance control box.

4) The roller shutter should be free of any obstructions.

5) The vertical hanging length of the chain must be adjusted within 3-6mm,adjustment should be made before hanging the 

shutter onto the roller axis.

6) It is strictly forbidden to pull on the motor down lead.

7) External power cord should be minimum 1mm diameter.

8) Special attention should be given to protecting the motor from humidity and rain, to prevent short-circuiting. 

9) The switch box has to be installed on the dry wall and placed at a height of over  1.5 meters high, this is to ensure that 

children cannot operate the wall switch and remote controller.

10) Stand under the door is forbidden when installing.

11) It is strictly forbidden to allow anyone or anything pass under the operating door.

12) It is strictly forbidden to install the motor in combustible or explosive areas.

13) Please refer to part four and five part if you want to know more about the left mounting, you can also refer to the installa-

tion diagram.

14) Add appropriate lubricating oil into the chain rollers after motor testing; continue to do so when required. 

15) The shutter motor must to be installed up to 2.5 meters above the ground or accessible passageway.

Friendly Reminder:

Please choose the safety equipment as follow if you install our shutter motor:

1) Safety brake: Guard against the shutter sudden fall, when the motor is operating.

2) Photocell: Force the motor stop and go up, if the shutter motor go down and some barriers under the door.

Prologue

ECR electronic rolling shutter motor is the product which our company has been producing for many years. It utilizes most 

advanced production techniques combined with the latest technologies available to provide reliability with diverse functio-

nality. The product has credible quality, it is simple to install and has proven to suit a wide variety of applications.

Opening your life

Opening your life

Hul

450 750 950

Summary of Contents for Hulk 450

























Reviews: