3
www.acclaimlighting.com
INSTALLATION
MOUNTING
The RDS 6 splitter can be mounted in any orientation, as required. Four slotted holes
(Ø 0.22 x 0.45”/Ø5.5 x 11.5mm) are built into the base for mounting purposes (see page 7
for dimensions).
POWER
The power cord is roughly 4.2 feet (1.3m) in
length. The power requirements are as follows:
•
Voltage: 100-277VAC 50/60Hz (autosensing)
•
Power:
14.4W
The power cord color designations
are as shown here.
Note: Apply power to the unit only once all
connections have been made.
FUSE REPLACEMENT
IMPORTANT: Ensure that power is isolated before attempting to remove the fuse
carrier.
Use a flat blade screwdriver to remove the fuse carrier. Push in and then turn 45 degrees
counter-clockwise to release.
Fuse type: 5 x 20mm glass 1A quick acting (F1L250V)
Summary of Contents for RDS 6
