12
GB
StreamPunch
TM
Ultra/Ultra MP
StreamPunch Ultra Die Sets
The StreamPunch Ultra uses a variety of easily interchangeable die sets that allow you to punch documents in line for several different binding
styles. By selecting the appropriate die set, you can use your StreamPunch Ultra to punch documents in any of the following binding styles.
DuraGlide HD
TM
die sets are shown in bold where available.
Die Set Description
RICOH Part Number
For Plastic Comb Binding:
Die, RICOH, Comb Bind
Die, RICOH, Comb Bind, HD
404767
409059
PB Plastic Bind; Hole Size: 8mm x 2.9mm (0.313" x 0.116") (LxW); Center-to-Center Hole Spacing: 14.3mm (0.563")
Fo
r Twin Loop™ Binding:
Die, RICOH, Wire 3.1, Sq.
404769
W3 Wire; Square; 3 Holes per inch; Hole Size: 4mm x 4mm (0.156" x 0.156") (L x W); Center-to-Center Hole Spacing:
8.5mm (0.333")
Die, RICOH, Wire 2.1, Sq.
404768
W2 Wire; Rectangle; 2 Holes per inch; Hole Size: 6.4mm x 5.4mm (0.250" x 0.214")(L xW); Center-to-Center Hole Spacing:
12.7mm (0.500")
Die, RICOH, eWire, 3:1, Sq.
404770
eWire; Square; 3 Holes per inch; Hole Size: 5mm x 5mm (0.197" x 0.197") (L x W); Center-to-Center Hole Spacing:
8.5mm (0.333")
Die, RICOH, Wire, 3:1, Rnd.
404759
W3 Wire; Round; 3 Holes per inch; Hole Size: 4mm (0.158") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.335")
Die, RICOH, Wire, 2:1, Rnd.
404758
W2 Wire; Round; 2 Holes per inch; Hole Size: 6.5mm (0.0.256") Diameter; Center-to-Center Hole Spacing: 12.7mm (0.5")
Die, RICOH, eWire, 3:1, Rnd.
404772
eWire; Round; 3 Holes per inch; Hole Size: 5.5mm (0.217") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.333")
For Color Coil™ Binding:
Die, RICOH, Coil, Rnd.
Die, RICOH, Coil, Rnd, HD
404757
409057
C4 Coil; Round; 4 Holes per inch; Hole Size: 4.4mm (0.174") Diameter; Center-to-Center Hole Spacing: 6.3mm (0.2475")
Die, RICOH, Coil, Oval
404771
C4 Coil; Oval; 4 Holes per inch; Hole Size: 4mm x 5mm (0.158" x 0.197") (L x W); Center-to-Center Hole Spacing: 6.3mm
(0.2475")
For Velo
®
Bind:
Die, RICOH, Velobind
®
, 11 Holes, Ltr.
404765
VB Velobind
®
; Round; 1 Hole per inch Hole Size: 3.2mm (0.125") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
Die, RICOH, Velobind
®
, 12 Holes, A4.
404766
VB Velobind
®
; Round; 1 Hole per inch Hole Size: 3.2mm (0.126") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
For Loose Leaf Binding:
Die, RICOH, 3 Hole, 8mm
Die, RICOH, 3 Hole, 8mm, HD
404760
409058
3 Ring Binder; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
Die, RICOH, 3/5/7 Hole, 8mm
404761
3 Ring, 5 Ring, 7 Ring; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
Die, RICOH, 4 Hole, 8mm
404762
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 8mm (0.315") Diameter
Die, RICOH, 4 Hole, 6.5mm
404763
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
Die, RICOH, 4 Hole, Scan
404764
4 Ring Binder; Scandinavian (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
©2016 GBC, Lake Zurich, Illinois - All rights reserved.
Graphics do not represent actual punch pattern dimensions or spacing.
* When the Plastic Comb binding die is used in the 21 hole configuration on A4 width paper (297mm), there is the potential for the outer edge of holes 1 and 21 to be torn. The theoretical
paper edge should be 1.62mm from the edge of the sheet. This event is dependent on paper type, paper width and hole alignment optimization. To avoid this issue, it is recommended to
use a 20 hole configuration instead. 20 hole comb binding supplies are commonly available from GBC and other manufacturers and are considered more optimal than the 21 hole
configuration.
1
21-A4
19-LTR
1
34-A4
32-LTR
1
23-A4
21-LTR
1
34
1
32-L
34-A4
TR
1
23-A4
21-LTR
1
34
1
47-A4
44-LTR
1
47-A4
44-LTR
1
11
1
12
1
3
1
7
4
1
4
1
4
