9
8
GETTING STARTED
1. Remove plastic bag from filter
Unscrew the bottom cover and remove the plastic bag from the filter.
2. Re-attach filter
Secure filter on the bottom cover and replace inside the purifier.
3. Set up
Plug-in your SensorPod
™
, and place upright on tabletop or counter across the
room, within line of sight of the purifier.
Plug-in your air purifier unit and power on. Place the purifier on a flat surface, free
from obstructions.
Signal strength may vary by location. In the rare occasion that it doesn’t work –
see page 18.
4. Start living with cleaner air!
The purifier will automatically adjust fan speeds based on the air quality readings
from SensorPod, and proprietary PureDirect
™
technology will deliver purified air
throughout the room!
up to 49' (15m)
Summary of Contents for TruSens Z-2000
Page 1: ...OWNER S MANUAL Z 2000...
