Entering and Modifying Parameter Values
You can change menu values or settings several ways:
Turn the pushknob below its label.
Enter a value in the numeric keypad, then press a pushknob to set the
value. This applies to pushknobs that select sources; use the
crosspoint number for a source, not its physical input number.
Use the joystick to change pushknob settings that have arrow icons
next to them. Adjust pushknob settings with left/right arrow icons by
moving the joystick left and right. Adjust settings with up/down
arrow icons by moving the joystick up and down. Adjust pushknob
settings with circular arrow icons by twisting the joystick handle.
You can copy a pushknob value to another pushknob. Pressing the
pushknob with the needed value copies it to the keypad buffer.
Pressing another pushknob enters the keypad value in it. For example,
to copy the value in pushknob 1 to pushknob 2, press pushknob 1,
then pushknob 2. Note the value in the numeric keypad register when
copying settings this way.
Clearing and Resetting Values and UNDO MENU
You can easily reset values and entire menus to their default settings:
Press the
CLEAR
button, then a pushknob to reset the value to default.
Press and hold
CLEAR
and press one or more pushknobs to clear
multiple settings to default.
Press and hold
CLEAR
and press a softkey to clear all the values for
that softkey to default. This resets both the softkey setting (if it is a
toggle), and any pushknob values.
Press and hold
CLEAR
and press a submenu softkey to clear all the
values for that submenu to default. This resets all softkey settings (if
they are toggles) and all pushknob values.
Press and hold
CLEAR
and press a menu button to reset all the values
for that menu to default. This resets all submenus, softkeys, and
pushknob values.
Press the
MENU UNDO Key
softkey in the Personality menu User
Keys & MISC submenu to enable and disable the
UNDO MENU
button. With this button enabled (default), you can use it to "back up"
through button presses. As you press
UNDO MENU
, the 8150 steps
backward and "undoes" button presses and menu settings. If you
disable the
UNDO MENU
button, you cannot automatically "undo"
button presses.
Press
CLEAR + UNDO MENU
to redo all the steps previously
undone with
UNDO MENU
.
Control Panel
8150 Technical Guide
4-18
System Overview
9100-0212-04 - May 2000
Summary of Contents for ASWR8150
