28
• the frame and the various components, if not serviceable any longer, have to be dismantled and divided according to their
nature, particularly copper and aluminium, which are present in conspicuous quantity in the unit. These operations allow easy
material recover and recycling process, thus reducing the environmental impact.
The user is responsible of the proper disposal of this product, according to national regulations in the country of destination of the
appliance. For more information you should contact the Installation Company or local competent authority.
An incorrect decommissioning of the appliance may create serious environmental damage and endanger people’s
safety. Therefore, it’s recommended that the unit shall be disposed only by authorized persons and technical training
who have followed training courses recognized by the competent authorities.
It is required to follow the same precautions described in the previous paragraphs.
Pay special attention during the disposal operation of the refrigerant gas.
The illegal disposal of the product by the end user leads to the application of the penalties in accordance with the
law in the country where the disposal takes place.
The crossed bin symbol applied on the appliance indicates that the product, at the end of its useful life, must be
collected separately from other wastes.
The units are produced in accordance with the EC directive on waste electrical/electronic equipment and the harmful
effects on incorrect disposal are reported in the user/installer manual. The manufacturing company or its
importer/distributor are available to respond to any requests for additional information.
12.1
Residual risks
In this paragraph, we point out the most common situations that could give rise to risks that cannot be eliminated by the
manufacturer during the design phase of the project.
Riscks due to:
Attention/Corrections
Handling
There is always a risk of falling or overturning the unit in the event of handling. Follow the instructions in the
"Handling" paragraph and all the required precautions according to local regulations.
Installation
Improper installation can cause water leakage, gas leakage, electric shock, fire risk, malfunction or damage
to the unit. Installation can only be carried out by qualified personnel.
Install the unit in an appropriate place without risk of flammable gas leakage. Make the installation area
inaccessible to third parties.
Dust/Water in the
electrical panel
Fix the panel of the electrical panel properly. Any infiltrations can cause RISK OF shocks and short circuits
with consequent damage to people/properties or to the unit itself.
Pay particular attention to the ground connection.
Maintenance
During maintenance, which must always be carried out by authorized personnel, make sure that the
disconnector is off and that no one can accidentally modify the disconnection of this device from the unit by
means of appropriate warnings and an appropriate padlock.
Fan motor
Coming in contact with the fan motor can cause injury and/or death. Do not get access to the unit or remove
the protections while the fan is running.
Refrigerant gas
Leakage
Wear appropriate PPE as a gas leak could cause injury and intoxication. Read carefully the "Refrigerant
Safety Data Sheet" reported in this manual. Do not use heat sources near the circuit before discharging it
completely.
Leakages in
hydraulic system
They can cause damage to properties and people and risk of short circuit. It is advisable to install shut-off
valves.
