41
38
Schem
e
5
Natural circulation solar heating system with 1 tank and
direct integration via valve logic.
Control logic
Scheme 06
Solar heating system with 2 tanks, valve logic control,
integration excluded.
Control logic
Scheme 15
EAST / WEST solar heating system, 1 tank and
supplementary heating excluded.
Control logic
Scheme 16
EAST / WEST solar heating system, 1 tank and
supplementary heating excluded.
Scheme 17
EAST / WEST solar heating system, 1 tank, direct
integration via valve logic.
Control logic
Schem
e
18
Solar heating system with 2 tanks, valve logic,
supplementary heating, additional pump on the 2nd boiler.
Control logic
P2: THERMAL DATA SETTING
Using this parameter, you can set the thermal data relating
to the selected system:
The control unit is supplied with pre-set thermal data for
optimal operation.
The modification of these values must be carried out by
qualified personnel.
SELECTED PARAMETER P2
PRESS THE KEY
‘
8
’
THROUGH THE ARROWS
‘
’ o
r
‘
’
IT IS POSSIBLE
TO SCROLL CYCLICALLY BETWEEN THERMAL
DATA - Safety temperatures
- Differentials
- Differential hysteresis
- Hysteresis of the safety thermostats -
Hysteresis of the thermostats
- Offset
- Maximum temperatures
- Integration temperature on probe S3
- How the integration works
- Economy temperature on probe S3
- ABC temperature (automatic boiler control)
PRESS KEY
‘
8
’
TO ENTER IN MODIFICATION OF THE
SELECTED THERMAL DATA;
THE DATA STARTS TO FLASH.
