Print Server User’s Guide
52
Software Configuration
Windows 95/NT 4.0
This procedure must be carried out on every workstation requiring access to the Print
Server’s printers. The Print Server driver must be installed first. The process is
identical in Windows 95 and Windows NT 4.0. The sample screens are from
Windows 95.
Before proceeding, check the following:
•
Print Server is ON and configured (if using TCP/IP)
•
Printer(s) connected to the Print Server, and on-line.
•
LAN is operational and using the appropriate protocol (either TCP/IP or
NetBEUI).
First Port Configuration
1.
Go to Start
è
Settings
è
Printers. Invoke the
Add Printer Wizard.
2.
Select the Local printer (My Computer on NT) option.
3.
Choose the Printer Model on the Print Server’s first port.
4.
Select PrintServer as the port in the
Select Port screen.
5.
Select the Configure Port button. The following
Configure Print Server screen
will appear
Figure 7 TCP/IP Configuration (Win95 PtP)
6.
Enter the configuration information as detailed below.
IP Address
Enter the IP address that was assigned to the Print
Server
Select Device Port
Select the Print Server port that the printer is connected
to (e.g. Parallel port 1).
