Print Server User’s Guide
78
SNMP Configuration
Menu equivalent: Configuration - SNMP
SNMP is supported only on model EP3003 CheetahPrint Power-3003.
See
Preparing the Print Server for SNMP on page 47 for details of these
configuration settings. After clicking this icon, the top section of the screen will
look like the following.
Figure 35 SNMP Configuration
If a Management Station (M1..M4) is selected, the bottom part of the screen will
look like the following example.
Figure 36 SNMP Management Station
If a Trap (T1..T4) is selected, the bottom part of the screen will change. The
following example is for T1.
