VR-200 16-Port Multi-WAN VPN Router
• 99 •
Client to Gateway
By setting this page, you can create a new tunnel between Local VPN device and mobile
user.
You can select
Tunnel
to create tunnel for single mobile user, or select
Group VPN
to create
tunnels for multiple VPN clients. Group VPN feature facilitates the setup and it’s not necessary
to individually configure remote VPN clients.
Tunnel
z
Tunnel No.:
The tunnel no. will be generated automatically from 1~
2
00.
z
Tunnel Name:
Once the tunnel is enabled, enter the Tunnel Name field. Such as,
Sales Name. This is to allow you to identify multiple tunnels and does not have to
match the name used at the other end of the tunnel.
z
Interface:
Select the Interface from the pull-down menu. When Multi WAN is
enabled, there will be four options. (WAN1~WAN4). The options of WAN ports will
be generated by WAN port number settings on General Setting or Port Management
page
.
z
Enable:
Check the box to enable VPN.