VR-200 16-Port Multi-WAN VPN Router
• 102 •
Local Security Group Type
(In Tunnel condition)
Select the local LAN user(s) behind the router that can use this VPN tunnel. Local Security
Group Type may be a single
IP
address, a
Subnet
or an
IP range
. The Local Secure Group
must match the other router's Remote Secure Group.
1. IP
Address:
If you select IP Address, only the computer with the specific IP Address that
you enter will be able to access the tunnel. The default IP is 192.168.1.0.
2. Subnet:
If you select Subnet (which is the default), this will allow all computers on the
local subnet to access the tunnel. Enter the IP Address and the Subnet Mask. The default IP is
192.168.1.0, and default Subnet Mask is 255.255.255.192.
Remote Client Setup
Remote Client (In Tunnel condition)
There are five types. They are
IP Only, IP + Domain Name (FQDN) Authentication, IP +
E-mail Addr. (USER FQDN) Authentication, Dynamic IP + Domain Name (FQDN)