VR-200 16-Port Multi-WAN VPN Router
• 68 •
Setting page. If User change the number of WAN ports here and click the Apply button, the
confirm message will be shown. Users have to make sure the General Setting configurations
match the number of WAN port settings here.
z
Port ID:
There are LAN1~LAN 11, WAN1~WAN4, and DMZ.
z
Interface:
The interface shown here will be changed automatically according to your
number of WAN port setting.
z
Port Disable:
Check the box, the port will be disabled. It is a per-port setting.
z
Priority:
Select High or Normal for Port-based QoS (Quality of Service). QoS is
used to maximize a network’s performance and this setting allows you to prioritize
performance on 16 ports.
z
Speed:
Users can manually config the per-port speed as 10Mbps or 100Mbps.
z
Duplex:
Users can manually config the per-port duplex as half-duplex or full-duplex.
z
Auto-negotiation:
If enable this function, every port can be set as auto-negotiation.
Users will not need to set up speed and duplex.
Click the
Apply
button to save the Port Management settings or click the
Cancel
button to
undo your changes.