VR-200 16-Port Multi-WAN VPN Router
• 70 •
Firewall
General
From the Firewall Tab, you can configure the Router to deny or allow specific internal users
from accessing the Internet. You can also configure the Router to deny or allow specific
Internet users from accessing the internal servers. You can set up different packet filters for
different users that are located on internal (LAN) side or external (WAN) side based on their IP
addresses or their network Port number.
z
Firewall:
The default is enabled. If users disable the Firewall function, SPI, DoS,
Block WAN Request will be disabled, Remote Management will be enabled and
Access Rules and Content Filter will be disabled.