Management Guide
2-35
Spanning Tree Configurations
This menu is used to configure STP parameters that apply to the overall switch.
The top half of this screen displays read-only values. The bottom half, starting
with Spanning Tree Protocol, is user configurable. To edit an entry, highlight it
with the cursor and press Enter.
+------------------------------------------------------------------------------+
| ES3616 CheetahSwitch Workgroup-3616
switch_a
|
| ~nt/Spanning Tree Protocol/Spanning Tree Protocol Configurations
admin
|
+------------------------------------------------------------------------------+
+--------------------------------------------------------+
|
Spanning Tree Protocol Configurations
|
+--------------------------------------------------------+
| |Bridge ID: 8000:000000AAAA00
|
| |Designated Root: 007F:000199E8AABB
|
| |Root Port:
5
|
| |Root Path Cost: 100
|
| |Current Max Age (sec): 20
|
| |Current Hello Time (sec): 2
|
| |Current Forward Delay (sec): 15
|
| |Hold Time (sec): 1
|
| |Topology Change Count: 1
|
| |Time Since Last Topology Change (sec): 14,250
|
| |
----------------
|
| |Spanning Tree Protocol: Enabled
|
| |Bridge Priority: 32,768
|
|v|Hello Time (sec): 2
|
+--------------------------------------------------------+
--------------------------------------------------------------------------------
<UpArrow><DownArrow>Move
<Enter>Modify
<ESC>Previous
Parameter
Description
Bridge ID
A unique (bridge) identifier for this switch that is composed of the switch’s
priority and MAC address.
Designated Root
The priority and MAC address of the device in the spanning tree that this
switch has accepted as the root device.
Root Port
The number of the port on this switch that is closest to the root. This switch
communicates with the root device through this port. If there is no root port,
then this switch has been accepted as the root device of the spanning tree
network.
Root Path Cost
The path cost from the root port on this switch to the root device.
Current Max Age
The maximum time (in seconds) a device can wait without receiving a
configuration message before attempting to reconfigure.
Current Hello Time
The time interval (in seconds) at which the root device transmits a
configuration message.
Current Forward Delay
The maximum time (in seconds) the root device will wait before changing
states (i.e., listening to learning to forwarding).
Hold Time
The time interval (in seconds) at which the root device transmits a
configuration message.
Topology Change Count
The number of times the spanning tree has been reconfigured.
Time Since Last
The time since the spanning tree was last reconfigured.
Topology Change
Summary of Contents for ES3616
