2-40
CheetahSwitch Workgroup-3616
Configuring SNMP Functions
Use the SNMP configuration screen to display and modify parameters for the
Simple Network Management Protocol (SNMP). The switch includes an on-board
SNMP agent which monitors the status of its hardware, as well as the traffic
passing through its ports. A computer attached to the network, called a Network
Management Station (NMS), can be used to access this information. Access
rights to the on-board agent are controlled by community strings. To communicate
with the switch, SNMP must be enabled on the switch, and the NMS must submit
a valid community string for authentication. The options for configuring community
strings and related trap functions are described in the following figure and table:
+------------------------------------------------------------------------------+
| ES3616 CheetahSwitch Workgroup-3616
switch_a
|
| /Switch Management/Advanced Management/SNMP Configurations
admin
|
+------------------------------------------------------------------------------+
+--------------------------------------------+
|
SNMP Configurations
|
+--------------------------------------------+
| |SNMP: Disabled
|
| |Get Community Name: public
|
| |Set Community Name: public
|
| |Trap Community Name 1: public
|
| |Trap Community Name 2: public
|
| |Trap Community Name 3: public
|
| |Trap Community Name 4: public
|
| |Trap Host 1 IP Address:
|
| |Trap Host 2 IP Address:
|
| |Trap Host 3 IP Address:
|
| |Trap Host 4 IP Address:
|
| |Cold Start Trap: Enabled
|
| |Warm Start Trap: Enabled
|
|v|Link Down Trap: Enabled
|
+--------------------------------------------+
--------------------------------------------------------------------------------
<UpArrow><DownArrow>Move
<Enter>Modify <->Delete IP Address
<ESC>Previous
Parameter
Description
SNMP
Enables or disables SNMP functionality.
Get Community Name
Enter a community entry authorized for read access.
(Maximum string length is 20 characters).
Set Community Name
Enter a community entry authorized for write access.
(Maximum string length is 20 characters).
Trap Community Name
A community specified for trap management access.
Trap Host IP Address
IP address of the trap manager.
Cold Start Trap
The switch was powered on.
Warm Start Trap
The switch was reset.
Link Down Trap
The connection on a port went down.
Link Up Trap
The connection on a port came up.
Authentication Failure Trap An SNMP authentication request failed.
Rising Alarm Trap
A rising alarm set via RMON was triggered.
Falling Alarm Trap
A falling alarm set via RMON was triggered.
Summary of Contents for ES3616
