Print Server User’s Guide
16
(c)
Select
Set to NetWare Print Server Mode.
(d)
Select the file server you logged on in step 1.(a) to be the master file server.
(e)
Replace the Print Server name with the name set in step 1.(d).
(f)
Select
Execute Setup.
Printer Server Mode in NetWare 4.X (NDS Mode)
Follow the steps below to configure the Print Server in NDS print server mode:
1. Quick Setup on a NDS network
(a)
Login as ADMIN. or a user with Admin. rights.
(b)
Run PCONSOLE program.
(c)
Select
Quick Setup.
(d)
Enter your desired print server name in the Print Server field. Record the
context.
(e)
Enter the desired names in the following fields:
New printer
New print queue
Print Queue Volume
(f)
Press [F10] to save.
(g)
Repeat steps (b) to (f) for parallel ports 2 and 3 or the serial port, if they exist.
(h)
Exit PCONSOLE.
(i)
Enter the command whoami and record the Tree name.
2. Configure the Print Server
(a)
Run the PSCONFIG program.
(b)
Select your Print Server. Replace the device name with the name used in step
1 (d).
(c)
Select
Set to NetWare Print Server Mode.
(d)
Enter data as follows:
NDS Tree name: -Tree name recorded in step 1 (i).
Print Server NDS Context: As recorded in step 1 (d).
(e)
Select
Execute Setup.
