Advanced Configuration
5-5
CLI Commands for System Identification – Enter the global
configuration mode, and use the
system name
command to
specify a new system name. Enter the wireless configuration
mode (either 11a or 11g), and use the
ssid
command to set the
service set identifier. Then return to the Exec mode, and use the
show system
command to display the changes to the system
identification settings
.
AP#configure
6-11
AP(config)#system name R&D
6-20
AP(config)#interface wireless a
6-70
AP(if-wireless a)#ssid r&d
6-90
AP(if-wireless a)#end
6-12
AP#show system
6-33
System Information
===================================================
Serial Number : A324003220
System Up time : 0 days, 0 hours, 32 minutes, 51 seconds
System Name : r&d
System Location :
System Contact : Contact
System Country Code : US - UNITED STATES
MAC Address : 00-30-F1-91-91-5B
IP Address : 192.168.2.51
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.250
VLAN State : DISABLED
Native VLAN ID : 1
IAPP State : ENABLED
DHCP Client : ENABLED
HTTP Server : ENABLED
HTTP Server Port : 80
Slot Status : Dual band(b/g)
Software Version : v0.0.0.2
===================================================
AP#
Summary of Contents for WA6102X
Page 27: ...Hardware Installation 2 4 ...
