System Configuration
5-46
The access points contending for the medium may not be aware
of each other. The RTS/CTS mechanism can solve this “Hidden
Node Problem.” (Range: 0-2347 bytes: Default: 2347 bytes)
CLI Commands for the 802.11a Wireless Interface – From the
global configuration mode, enter the
interface wireless a
command to access the 802.11a radio interface. Set the interface
SSID using the
ssid
command and, if required, configure a name
for the interface using the
description
command. You can also
use the
closed-system
command to stop sending the SSID in
beacon messages. Use the
turbo
command to enable this
feature before setting the radio channel with the
channel
command. Set any other parameters as required. To view the
current 802.11a radio settings, use the
show interface wireless
a
command.
AP(config)#interface wireless a
6-70
Enter Wireless configuration commands, one per line.
AP(if-wireless a)#description RD-AP
6-85
AP(if-wireless a)#ssid r&d
6-90
AP(if-wireless a)#turbo
6-89
AP(if-wireless a)#channel 42
6-88
AP(if-wireless a)#closed-system
6-86
AP(if-wireless a)#transmit-power full
6-99
AP(if-wireless a)#speed 9
6-87
AP(if-wireless a)#max-association 32
6-100
AP(if-wireless a)#beacon-interval 150
6-90
AP(if-wireless a)#dtim-period 5
6-91
AP(if-wireless a)#fragmentation-length 512
6-92
AP(if-wireless a)#rts-threshold 256
6-93
AP(if-wireless a)#end
Summary of Contents for WA6102X
Page 27: ...Hardware Installation 2 4 ...
