3002 MICROSCOPE SERIES
ACCU-SCOPE
®
73 Mall Drive,
Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
10
ASSEMBLY
(continued)
Installing the Objectives
Adjust the coarse focus knob until the
mechanical stage reaches its lowest limit
position.
Screw the 4×objective into the nosepiece from
the left or the right side, then rotate the
nosepiece clockwise and mount other objectives
by the sequence of low to high magnification as
shown in Fig. 6.
Installing the Glass Filter
Swing out the condenser holder
①
(Fig. 7) and
insert the filter into the holder
②
. Swing the
holder back in place.
Fig. 5
Fig. 6
Fig. 7