3002 MICROSCOPE SERIES
ACCU-SCOPE
®
73 Mall Drive,
Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
13
ADJUSTMENT
& OPERATION
Adjusting the Brightness
Connect the power supply and turn on the main
switch
①
(Fig. 13) .
Move the variable light intensity dial
②
(Fig 14)
toward the front of the microscope base to
increase the brightness; turn it toward the back of
the microscope base to decrease the brightness.
Placing the Specimen
Place the specimen
①
on the center of the
stage and use the slide holder to gently secure
the slide (Fig 15).
Rotate the X and Y adjustment knobs
②
of the
mechanical stage to position the specimen for
viewing.
Use caution when changing objectives
– do
not allow the objective to touch the
specimen slide.
Fig. 14
Fig. 13
②
①
Fig. 15