45
4.4 Point-to-point Model
Attention:
1. Use the WIFI function, the PC receiver must support wireless function, please check whether your
network card support wireless function.
2. Use network cable to link the LCD Microscope and PC, the network cable must be a crossover cable. See
the part V to know
what are straight and crossover cable
3. PC receiver must install the NMSClient software to receive the images sent by the LCD microscope.
4. In this model, one LCD microscope can only communicate with one PC, it cannot communicate with
more than two PCs.
5. In order to ensure the image transmission quality when using the WIFI function, please make sure the
LCD microscope is not very far from the PC and in a non-blocking space.
4.4.1 WIFI Function
For point-to-point communication, you need a computer with a wireless
network card.
The LCD Digital Microscope communicates with the PC directly, without a
router.
(1) New point-to-point network
(1)
Start your system Window CE.
(2)
A dialog box appears. You can also get this dialog by double clicking the icon
on the task bar.
(3)
Double click
“Add New…”.
(4)
Comes out a
“Wireless Network Properties” dialog. Settings should be as
below:
1. WIFI function
2.
Network cable (
crossover cable
)
