EXC-400 MICROSCOPE SERIES
ACCU-SCOPE
®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
11
DETAILED ASSEMBLY
(continued)
Installing the Eyepieces -
(Fig. 9)
Carefully remove the eyepieces
①
from the protective
packaging – be sure not to touch any optical (glass)
surfaces. Remove the dust caps.
Insert an eyepiece
①
into one of the eyepiece tubes
②
and gently twist and push the eyepiece in until it is flush
with the top surface of the eyepiece tube
.
Repeat above for the other eyepiece.
Installing the Objectives -
(Fig. 10)
Rotate the coarse focusing knob to lower the stage to its
lowest position.
Install the objectives into the nosepiece
①
from the
lowest magnification to the highest in a clockwise
direction beginning with the first empty objective
receptacle in front.
Install each objective by using two hands to position and
gently screw in the objective in a clockwise direction into
the threads of the nosepiece receptacle.
NOTE:
Never force any objectives onto the threads of
the nosepiece, and do not over-tighten.
Installing the Power Cord -
(Fig. 11)
Align and plug the female end
①
of the power cord into
the power cord socket
②
on the back of the microscope.
Plug the other end into a grounded (3-prong) outlet.
NOTE:
Always use the power cord that is provided with
your microscope; using a different power cord may
damage your microscope. Should you need a
replacement, contact your authorized ACCU-SCOPE
dealer or call ACCU-SCOPE at 1-631-864-1000 for a
dealer nearest you.
Fig. 9
①
①
②
Fig. 10
Fig. 11
②
Summary of Contents for EXC-400 Series
Page 2: ......