![background image](http://html1.mh-extra.com/html/accu-scope/exc-500/exc-500_user-manual_3732920009.webp)
EXC-500 MICROSCOPE SERIES
ACCU-SCOPE
®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
9
DETAILED ASSEMBLY
(continued)
Installing the Nosepiece -
(Fig. 6)
Unscrew the dust plugs from the nosepiece
①
for the number
of objectives you will be installing.
Using the Hex wrench, loosen the lock screw
②
enough so
that the nosepiece can easily slide into the notch
③
on the
front of the dovetail mount
④
, then slide the nosepiece onto
the mount.
Retighten the lock screw
②
with the Hex wrench.
Installing the Viewing Head -
(Fig. 7)
Using the Hex wrench loosen the lock screw
①.
Position the viewing head
②
above the dovetail opening
③
as shown and with it tilted slightly down on the right, slide the
dovetail under the notches in the dovetail hole and set it into
place with the two eyepiece tubes
④
facing forward.
Retighten the lock screw
①.
Installing the Eyepieces -
(Fig. 8 & 9)
Carefully remove the eyepieces
①
from the protective
packaging – be sure not to touch any optical (glass)
surfaces. Remove the dust caps.
Insert an
eyepiece
①
into one of the eyepiece tubes
②
and
gently twist and push the eyepiece in until it is flush with the
top surface of the eyepiece tube
.
Repeat above
for the other eyepiece.
①
②
③
Fig. 6
Fig. 7
①
②
③
④
④
Fig. 8
Fig. 9
①
②