EXS-210 STEREO MICROSCOPE
ACCU-SCOPE
®
7
ADJUSTMENT & OPERATION
(continued)
Changing the Magnification
(Fig. 5)
Using the finger grips at the top of the turret
①
, rotate the
objective turret until it clicks into place. The magnification of the
objective in the field of view is indicated by the number
②
on
the front of the objective turret (facing forward).
Additional magnification ranges can be obtained through the
use of optional 5x, 15x, or 20x eyepieces.
Total Magnification =
Magnification of microscope body x
magnification of eyepiece
(i.e., 3x X 10=30x)
Adjusting Illumination
(Fig. 6)
The EXS-210 is equipped with a rechargeable variable, built-in
3-way illumination system: LEDs for incident (top) and
transmitted (bottom).
Brightness adjustment: the right brightness adjustment dial
①
is used to adjust the bottom illumination, and the left brightness
adjustment dial
②
is used to adjust the top illumination.
Turn the dials to adjust the brightness as needed.
Each dial also has its own on/off so you can use either top
illuminator or bottom illuminator, or both illuminators
simultaneously.
For more information about the rechargeable LED illumination
system and replacing the rechargeable batteries, please refer to
pages 8-9.
①
Fig. 5
Fig. 6
②
①
②
