Accu-Sort
®
Systems, inc.
511 School House Road
Telford, PA 18969 U.S.A.
1-800-BAR-CODE
1-(215)-723-0981
This copy expires 7 days after: 8/25/06
unless stamped "CONTROLLED
COPY" in red
Issued: 07/06/05
Revised:
TP-ENM-704
Rev.
A
Page 1 of 22
Annotations to this document are acceptable only if done in RED pen and initialed by a
representative of the department responsible for the creation and maintenance of the document
RFR-02 READER TEST PROCEDURE
______________________________________________________________________________
THIS IS A CONTROLLED COPY ONLY IF STAMPED “CONTROLLED COPY” IN RED.
©
Accu-Sort Systems, inc.
Note
: You shall refer to
ERP
to determine the
Rev.
of assembly.
1.0 PURPOSE
This document provides instructions for testing assembly #1000052365 (12 VDC Power) and
1000053245 (10-30 VDC Power)
2.0 SCOPE
This document applies to any of the above items that have the potential of being shipped to a
customer in order to fulfill a sample request or a normal sale. It shall be used by ASI production
when being assembled, set-up or tested at ASI. At the discretion of the appropriate ASI personnel, it
can also be used by outside vendors.
3.0 RESPONSIBILITY
Primary: Production
Support: Manufacturing
Engineering
4.0 REFERENCES
GU-ERP-019 Guide to Quality Module Data Entry
SF-QAF-006 Parts Return Reject Repair Tag
SP-QAF-005 Control of Nonconforming Product
WI-QAF-015 In-Process
Inspection
1000052365
RFR-02 (12VDC Powered) Assembly BOM
1000053245
RFR-02 (10-30VDC Powered) assembly BOM
5.0 DEFINITIONS
6.0 REQUIREMENTS
Tools Required
RFID Spectrum Analyzer
Universal
Counter
3/16”
Nut
Driver
Variable Power Supply
Philips
Screwdriver
Flat
Screwdriver
RFA-02 ASI Antenna 5” x 7”
Test
Leads
(“Jumper
Cables”)
