![background image](http://html1.mh-extra.com/html/accu-turn/1250/1250_service-manual_3735141050.webp)
M 0494
- 3
GB
1 - INITIALIZATION OF NEW BOARD
In the case of a new board, proceed as follows:
- switch on the machine keeping
pressed .
- the wording “INIT NOVRAM” appears.
- press
to confirm.
N.B. Such operation causes the loss of any calibration or presetting carried
out previously.
- Calibrate the machine again according to requirements.
2 - TO CHANGE SUPPLY VOLTAGE
(See recommended spare parts lists and power layout diagram)
The machine can run on 115 V - 50/60 Hz or 230 V - 50/60Hz.
To change the supply voltage, proceed as follows:
1) Replace the motor.
2) Replace the entire power board or else modify the board as follows:
A) Replace the capacitor.
B) Replace the transformers.
3 - PASSWORD
To perform certain operations which may compromise machine function or calibration, the following
buttons must be pressed in sequence:
[1][3][5][7]
Summary of Contents for 1250
