9. Do not overreach:
Maintain a balanced stance and keep your
body under control at all times.
10. Hand Safety:
Keep hands away from moving parts when the
machine is under power.
Never clear chips or debris when
the machine is under power and never use your hands to clear
the chips.
Never use compressed air to clean machine; use
only a soft bristle brush or vacuum cleaner.
11. Spindle Rotation:
Be sure that the rotation of the spindle
is correct.
12. Avoid Accidental
Starting: Make certain that the motor
switch is in the
"Off" position before connecting power
to the machine.
13. Machine Capacity:
Do not attempt to use the machine for
other than passenger car and light truck drums and discs,
•
or for operations for which the machine was not
intended.
14.
Careless A c t s :
GIVE THE WORK YOU ARE DOING YOUR UNDIVIDED
ATTENTION.
15.
Disconnect Electrical Power before performing any service
or maintenance on machine.
16.
Job Completion:
If the operator leaves the machine area
for any reason, the machine should be turned off, and the
spindle brought to a complete stop before the operator
departs.
In addition, if the operation is complete, the
operator should clean the machine and work area.
NEVER CLEAN
THE MACHINE WITH THE POWER ON.
17.
Replacement P a r t s :
Use only ACCU-TURN replacement parts
and accessories; otherwise, WARRANTY IS NULL AND VOID.
18.
M i s u s e :
Do not use the machine for other than its intended
use.
If used for other purposes, ACCU Industries Inc.,
disclaims any expressed or implied warranty, and holds itself
harmless for any injury or loss that may result.
5
