A) Cleaning the Optical Sensors
It is important to clean all the sensors to avoid any paper particles or dust from
sticking to the IR transmitter or IR receiver sensors. The IR detectors may be
wiped with a soft cloth soaked with alcohol.
B) Cleaning the Inner Side of the Machine Periodically
It is necessary to clean the inside of the machine once a month or when needed.
Unplug the machine and lift the top cover (where the handle lays) to gain access
to the interior.
C) Additional Recommendations
Avoid operating the machine in a dusty or dirty room. To guard the machine from
the elements, always keep it protected with the supplied cover (when not in use).
11
Cleaning of the Machine
!
WARNING: BEFORE DOING ANY CLEANING, TURN THE POWER SWITCH OFF AND DISCONNECT
THE POWER CORD FROM THE MACHINE. KEEP IN MIND THAT PROBLEMS OR DEFECTS
THAT ARISE FROM LACK OF PERIODIC MAINTENANCE ARE NOT COVERED BY THE WARRANTY.
Summary of Contents for AB-1100 Plus MG/UV
Page 1: ...User Guide Bill Counter AB1100 PLUS...
Page 32: ...www accubanker com...
