AccuBANKER D580, User Manual

9

2.1 Bill Ejection Setting

    
The user can set the unit with two different ejection settings directions for the 
scanned bill: ejection by the frontal slot or ejection by the rear slot. To set the 

desired option, the user must press the “DIR” button once and the arrow on the 

display will show the ejection direction selected.  

If the ejection setting is selected to eject bills by the rear slot, the stacking tray 

should be attached to the unit.

2.2 Currencies Selection

The default currencies to be detected by the detector are EUR and USD, the 
other currencies are optional. In order to choose the desired currency, press 
“CUR” button for 2 seconds, the detector will automatically enter in the Currency 
Selection Menu and display the list of available currencies.
In this mode, the currencies to be selected are on the left and the currency se

-

lected is on the right. Pressing “CUR” key repeatedly, the currencies will be dis

-

played in the currency selecting area consecutively. After confirming the currency 
to be detected, press “CUR key for 2 seconds to save current setting and exit the 
Currency Selection Mode.
Press the “STA” key to exit the currency selecting mode without saving the 

current setting.

2.0 Setting Up Cont.